spanish polar fleece desert
The garment, closed by a two-cursored waterproof zip fastener. Is made of anti-infrared camouflage fabric.
The right front chest have a flap on the inside to cover the zip fastener. It has a width of 43mm and it run down the entire front and collar, forming a fold towards the outside at the upper end of the collar to cover the zip fastener’s cursor. This last piece will be rounded in shape and made in navy blue fabric on both sides.
There is a pocket positioned where each front joins the sides, closed using a waterproof zip fastener, in an upward direction, with a length of 203mm. The pocket pouch is made of lining fabric.
On the right front, at chest height, there will be a vertical pocket, with a waterproof zip fastener with an upward closure, measuring 163mm.
Both zip fasteners have a piece sewn onto their upper side, of double camouflage fabric, to cover the cursor. All the pockets have an inner facing in navy blue fabric.
The left front, at chest height, has a piece of “velcro” type fabric or similar, looped part. It measure 120mm wide by 50mm high and it is sewn around its outline with a line of stitching along the edge.
Back side made of a single piece, joined to the sleeves and sides by a flattened seam the width of the sewing machine foot. It is curved in shape and slightly longer than the front.
On the inside of the garment, the bottom will be finished off, around its entire outline, with a false piece of camouflage fabric measuring 42mm.
The sleeve are Raglan type made up of two pieces: an upper part and a lower part with side panel.
At the wrist opening, a 42mm piece of navy blue fabric will be sewn to form the hem. On the inside, a cuff will be sewn to this piece, made from double elastic fabric, which adapt to the wrist to keep out the cold and will have an opening on the side, allowing the thumb to pass through.
On both sleeves, the upper part will form a curve. Centred on the left sleeve, 250mm from the collar seam, there is a piece of “velcro” type fabric or similar, looped side, where the nationality badge will be positioned. It measures 60mm wide by 30mm high and it is sewn along the edge around its entire outline.
The lower part of the sleeve is a continuous piece from the cuff to the bottom of the side. It is trapezoid-shaped, with the cuff part being narrower than the side panel part.
Collar made in double fabric and with a height at the centre back of 73mm.
It is made of navy blue fabric on the outside and polar fleece on the inside. It is sewn along the width around its outline and fixed at the edge at the join between the body and the jacket.
