inner-header

Products

tactical digital camouflage awning waterproof infrared fabric

Short Description:



Product Detail

Product Tags

Production Description 

It is made up of two pieces that is joined by sewing with a double-needle machine and subsequent heat-sealing. In the contour, a 20mm hem is made, applying in the center of each side and corners, a piece of double fabric on which a 20mm wide ribbon  sit on the inside, forming a 50mm loop.

Bend the hem and on the smaller side, five pins is applied evenly distributed and that connect with those located on the opposite side. The separation between them is 460mm.

In the center of the internal face and in the longitudinal direction, there is a double fabric reinforcement of 80x160mm, and on this and on the external face, a tape of 20mm and 280mm in total length, forming a loop of 65mm of light. in the center of it. To protect this area from the entry of water, another piece of the same dimensions is applied, which is heat-sealed around its perimeter.

 


  • Previous:
  • Next:


  • Previous:
  • Next:
  • Write your message here and send it to us