Product Description

The polo shirts is made by special polyester fiber with silver yarn, Effective anti-bacterial and anti-microbial activity against the bacteria STAPHYLOCOCCUS AUREUS ATCC 6538. With a contact time of 24 hours, the original fabric will show a reduction in growth of 99%.

The original fabric, after 50 washes, with a contact time of 24 hours will show a reduction in growth of 95%.

The style consist of two parts. Dark green is for upper part and the lower parts are light green color. The neck is made of a piece of hook and loop tape width 25 mm and length 20 mm. This leave a useful extension of 9 cm, which is necessary for installing the jacket.

At the top of center, there is a 150 mm length opening with three Buttons matched with main fabric.

Back body consist of two parts: same color as front side. At the bottom of polo, the seam is cut, leaving a 5 cm opening,this opening is completed by a hem of about 15 mm. The length of the back is larger than the front, exceeding the front by 20 mm.

There is a spare button at the connection of the front part on the left side of the bottom, the collar is a shirt type and is consist of two layer main fabrics of light green color, the back height is 75 mm. Around it 7 mm from the edge, the seam between neck and body is completed use by a double belt about 8 mm width to match the neck tissue. Focus on Such joints is marked with dimensions.

On the left sleeve 2 cm away from the nationality mark and centered on it, it should be provided.

A living 1.5 cm wide inner pocket pen holder with a view of the area. At the top, the free spacing is 4 cm and the depth is 12 cm.

5 cm from the connection at the bottom of back yoke, brings the module to two lines “National Guard,” about 282 x 93 mm. At the right front, centered on chest height, 3.5 cm away from waist.

Module with “National Guard”, size 110 x 10 mm. 1 cm below it, it will carry a 1.6 x 6 cm female hook and loop tape Canine tissue used to set personal identification numbers.

Using the identification number directly thermally fixed instead of the identification number Velcro type tape, and in its original position,thermal fixation should not be affected in any way.

Change or degrade after washing, and use normally during the whole service life of clothes. United Nations The characteristics of alphanumeric markers (type, graphics, color, etc.) will be determined by the Provide National Guard services to the winning bidder.

At the center of left front in chest height, 2 cm from the bottom of canesu Embroidered symbols representing the National Guard on the fabric (made of spirits and swords) Crown with a crown, in size about 45 mm x 30 mm, The assembly is positioned by industrial embroidery using polyester yarn Cork and tones are fluorine yellow, red and blue.

In the left sleeve, a badge will be embroidered 10 cm from the seam on the shoulder Nationality, size is 58 mm x 24 mm.