Wholesale High Quality Fr Workwear & Safety Supplies Manufacturers - 3 layer waterproof Soft Shell – QIANDAO

Product Description

The garment, closed by a two-cursored waterproof zip fastener. It is made by two colors, the front and back yoke exclude collar, the upper part of shoulder, are yellow color. Other part are all navy blue as photo.

The right front chest have a flap on the inside to cover the zip fastener. It has a width of (43 ± 2) mm and it will run down the entire front and collar, forming a fold towards the outside at the upper end of the collar to cover the zip fastener’s cursor. This last piece will be rounded in shape and made in navy blue fabric on both sides.

There will be a pocket positioned where each front joins the sides, closed using a waterproof zip fastener, in an upward direction, with a length of (203 ± 2) mm. The pocket pouch will be made of lining fabric.

On the right front, at chest height, there will be a vertical pocket, with a waterproof zip fastener with an upward closure, measuring (163 ± 2) mm.

Both zip fasteners will have a piece sewn onto their upper side, of double navy blue fabric, to cover the cursor. All the pockets will have an inner facing in navy blue fabric.

The left front, at chest height, will have a piece of “velcro” type fabric or similar, looped part. It will measure (120 ± 2) mm wide by (50 ± 2) mm high and it will be sewn around its outline with a line of stitching along the edge.

Back side made of a single piece, joined to the sleeves and sides by a flattened seam the width of the sewing machine foot. It will be curved in shape and slightly longer than the front.

On the inside of the garment, the bottom will be finished off, around its entire outline, with a false piece of camouflage fabric measuring (42 ± 2) mm.

The sleeve are Raglan type made up of two pieces: an upper part and a lower part with side panel.

At the wrist opening, a (42 ± 2) mm piece of navy blue fabric will be sewn to form the hem. On the inside, a cuff will be sewn to this piece, made from double elastic fabric, which will adapt to the wrist to keep out the cold and will have an opening on the side, allowing the thumb to pass through.

On both sleeves, the upper part will form a curve. Centred on the left sleeve, (250 ± 5) mm from the collar seam, there will be a piece of “velcro” type fabric or similar, looped side, where the nationality badge will be positioned. It will measure (60 ± 2) mm wide by (30 ± 2) mm high and it will be sewn along the edge around its entire outline.

The lower part of the sleeve will be a continuous piece from the cuff to the bottom of the side. It will be trapezoid-shaped, with the cuff part being narrower than the side panel part.

Collar made in double fabric and with a height at the centre back of (73 ± 2) mm.

It will be made of navy blue fabric on the outside and polar fleece on the inside.

It will be sewn along the width around its outline and fixed at the edge at the join between the body and the jacket.